Inserts

Surfacing tools for consistent and spark-free surface preparation including paint removal (if needed) before fusion of threaded studs

Stop drill bit for HSC installation (TE-C)

SDS Plus (TE-C) hammer drill stop bit for HKD-TE-CX long HKD setting tools

SDS Plus (TE-C) hammer drill stop bit for HKD-TE-CX short HKD setting tools

SDS Plus (TE-C) stop bit for HKD anchors

Stop drill bit – required for installation of HDA undercut anchors

Stop drill bit – required for installation of HDA undercut anchors

Stop drill bit (HMU)

Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners

Stepped drill bits for pre-drilling accurate holes or removing coatings for S-BT threaded screw-in studs on steel

Stepped drill bits for pre-drilling accurate holes or removing coatings for S-BT threaded screw-in studs on steel

Stepped drill bits for pre-drilling accurate holes or removing coatings for S-BT threaded screw-in studs on steel

Ultimate SDS Plus (TE-C) hollow drill bit for virtually dust-free hammer drilling in concrete

Ultimate SDS Max (TE-Y) hammer drill bit for virtually dust-free drilling in concrete

Customised screwdriver bits for Hilti screw fastening systems

PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels

Stepped drill bit for predrilling accurate holes for S-BT threaded screw-in studs on aluminium and steel

Stepped drill bit for predrilling accurate holes for S-BT threaded screw-in studs on aluminium and steel

Stepped drill bit for predrilling accurate holes for S-BT threaded screw-in studs on aluminium and steel

Drill bit for precise drilling in natural stone panels

Setting tool (HSP/HFP)

1/2" long impact socket for tightening bolts and anchors

1/2" (inch) short impact socket for tightening bolts and anchors

1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation

Accessory for impact sockets

TE Tool Shaft for sockets

Nut setter with magnetic screw retention for use with hex-head screws

Nut setter with non-magnetic / ball-lock screw retention for use with hex-head screws

Impact socket set for tightening bolts and anchors

Nut setter for tightening flange nuts on threaded studs

Torque-controlled socket wrench for setting HSA anchors